Attachment 12 - Typical Type C Elevations

TYPICAL TYPE C ELEVATIONS

Front Elevation C1

Scale: 1/4" = 1'-0"

• Decorative knee brace
• 1x4 trim on 2x10 fascia trim
• Knee brace
• Board and batten siding
• Laminated asphalt shingles
• Pre-fin. metal roofing
• 1x4 door and window trim
• Conc. fibre lap siding
• Pre-fin. alumn. gutter
• 1x4 corner trim
• Pre-manuf. stone veneer
• Tapered capital trim

Right Side Elevation C2

Scale: 1/4" = 1'-0"

• Decorative knee brace
• 1x4 trim on 2x10 fascia trim
• Board and batten siding
• Laminated asphalt shingles
• Pre-fin. metal roofing
• Knee brace
• Conc. fibre lap siding
• 1x4 corner trim
• Metal flashing on 2x12 fascia
• Tapered capital trim
• Pre-manuf. stone veneer
• Decorative knee brace (lower level)

Rear Elevation C3

Scale: 1/4" = 1'-0"

• Decorative knee brace
• Laminated asphalt shingles
• 1x4 trim on 2x10 fascia trim
• Pre-fin. metal roofing
• Pre-fin. alumn. gutter
• 1x4 door and window trim
• Conc. fibre lap siding
• Custom fascia trim
• Metal flashing on 2x12 fascia
• 1x4 corner trim

Left Side Elevation C4

Scale: 1/4" = 1'-0"

• Laminated asphalt shingles
• Pre-fin. metal roofing
• Knee brace
• 1x4 door and window trim
• Cedar shingle siding
• Conc. fibre lap siding
• Metal flashing on 2x12 fascia
• Tapered capital trim
• Pre-manuf. stone veneer

---

Project Information

• Project: development permit, 102 ATKINS ROAD, VIEW ROYAL B.C.
• Contractor: EN VIRO TEC GENERAL CONTRACTING LTD.
• Design Firm: VICTORIA DESIGN GROUP
• Drawing #: 7548
• Scale: 1/4" = 1'0"
• Drawn by: NS
• Date: 25/1/16